Tech Notes from the Field

This was a tough week. The economy strikes again. I witnessed the layoff of 13 full-time employees and a handful of part-time employees. All good people.  It seems every radio group has now seen what the economy has done, and we all must take up the slack as we move forward. Even with this tragic event, there is work to be done. In my case a lot.

This week I went live with our new Sage ENDECs. I have the air chain switching setup within the SAS router and all the handheld RC-1 controllers work. I now need to implement automation control, but that is up in limbo as we wait to see if and when we get our new system. I will have a temporary solution within the next couple of weeks.

On that note I am not impressed by the input controls of the ENDEC. There are 5 inputs to use, but you can’t use them the way you want. Sage gives you schemes to use them the way they think they should be used. I have called and expressed my concerns, but they go unheard. The main headache is their required 1 second closure for the box to work properly. Anything less and it acts different and creates a gotcha. The SAS closures are roughly 300ms. Using Scheme 1 instead of a RWT it starts a 15 minute hold timer before running the test. Not very intuitive. Why we cannot program how the inputs work is beyond me, especially since the box is network accessible. And the answer is yes, I am looking for ways to “hack” in and control the box via something other than their web GUI.

I also cleaned up a Harris/PR&E Impulse console. I had to order a handful of new switches. I must stress if coffee is spilt into a console, just tell us. I was able to clean things up on the PC board and luckily the solder pads were intact. I was suspect of the ribbon cable connector. I used Deoxit and made sure all the contacts got burnished. I sparyed air through to get any extra residue and cleaner out of the connector. The console is up and running for morning show production. Now if I could drop a little SAS Rubicon in there….

Now that this stress week is over I can attack details and do some digging. Some days I wish I could program so hacking wasn’t such a chore. At least it is fun to dig! 

Have a good weekend.

Posted from WordPress on NookColor